Double Review- Apollo V-Tube & SmokTek 4XL Cartomizer

Hello all, today I'm bringing you a quick review of the Apollo V-Tube variable voltage mod as well as a first look at the SmokTek 4XL cartomizer. We have a lot of stuff to cover so let's begin!

copyright Apollo E-Cigs

I saw this knock off lavatube for 1/2 the cost of the original and decided to give it a try. I ordered this mod from www.apolloecigs.com for $46 (device only [or so I thought]) When I received it, instead of being just the tube, they sent me the whole kit including a battery, charger, drip tip, 3ohm atomizer and a case which was a happy accident in my favor.

copyright Apollo E-Cigs

The atty was ok at best. It leaked like crazy and didn't last very long but hey, who can argue with free? As for the drip tip, just a cheap clear one you get with a dual coil tank, no big deal. The case is nice as it's simply a rebranded Joytech case, only problem being it doesn't fit the device with anything attached atop it. The battery/charger are decent, the charger is a single charger with a spring to secure it in place and a protected 18650.

Functionality of the device has been superb. It can handle all sorts of atty/carto resistances which is convenient. I've taken it to work with me and it can definitely handle some abuse. It has a drip catcher which helped greatly with the flooding atomizer and seats a J, MAP or Phiniac tank easily. You can ramp the voltage from 3.0-6.0v in .1v increments and check the battery level with 7 clicks of the power button. The 18650 battery last a while, I'm an average vaper and I can get about a day and a half with a full charge. When the battery drops below 3.5v, it starts to lose some power and when it gets to 3.2 the LED blinks and it shuts itself off. It also has an auto shut off feature in case it goes off in your pocket.

That's the good news...read the next paragraph before rushing to order.

Upon arrival, mine had a vertical scratch on the big button of which I was not happy with. After a few weeks of use, the paint is starting to rub off the battery cover and big button. I'm not sure why the entire device isn't entirely aluminum, probably to save money. Also, today I noticed the battery cover doesn't sit perfectly flush to the main part of the tube where you can see the threads which leads to believe this might eventually cause corrosion or other problems down the road. The smaller buttons rattle back and forth freely which is ugly and makes the device seem cheaply built. Last complaint I have is that the threads are very crunchy which can be helped by putting on some aluminum lubricant but I was still slightly disappointed at this fact.

Bottom line: this is a well functioning device that has some aesthetic and design flaws.

Value: ★★★☆☆
Aesthetics: ★★☆☆☆
Functionality: ★★★★☆